Transform Your Home into a Smarter Living Space with Koble. Schedule an appointment today at 8129 4164!

Smart Home


BTO Smart Home Timeline: What to Plan From Key Collection to Move-In


November 21, 2026

BTO Smart Home Timeline: What to Plan From Key Collection to Move-In

Plan your BTO smart home before you hire your interior designer.

Koble recommends planning your BTO smart home 6 to 8 weeks before key collection, ideally before you hire an interior designer. Wireless devices, such as Koble’s “no neutral” switches, can be added after you move in, and our guide to where to start with your first smart home shows which to begin with. Hardwiring motorised curtains or cameras is much harder once the renovation is done, which is why an early start helps.

This guide follows a BTO flat from that first consultation to move-in: what to decide, what to tell your interior designer and what it costs.

BTO smart home at a glance (Prices are correct as of November 2026)

What you want to knowAnswer
First contact6 to 8 weeks before key collection
Hardware installation1 day
Package, 3-room flatSGD 1,800 to SGD 2,500
Package, 4-room or 5-room flatSGD 2,200 to SGD 3,500
After you move inSoftware set up and a personalised 1-to-1 tutorial

Why the timing matters

An early consultation gives you a budgetary quote before any building work begins, and the exact electrical requirements to share with your interior designer. It also lets you gauge how much smart home experience your designer has.

If your chosen designer is new to home automation, Koble’s team draws on 9 years of experience to guide them through the process. 

The BTO smart home timeline, step by step

A BTO smart home project runs in four stages, from the first consultation to move-in:

  1. Before key collection: a consultation and a budgetary quote, followed by a downpayment. You leave with the exact electrical requirements to give your interior designer, which come down to two decisions:
    • Power points: where they go for hubs and motors.
    • Neutral wires: whether your light switches will use them.
  2. During the early electrical works: Koble will study the new design with your interior designer and provide recommendations. You can add or remove smart devices freely and are not locked into your original package.
  3. Once the lighting and switch boxes are fully installed: Koble fits the smart hardware, which takes 1 day.
  4. After you move in: Koble configures the software and gives you a personalized 1-to-1 tutorial.

The two decisions in stage 1 have to be made before the renovation starts, and the neutral wire is the one that shapes your choice of switch. 

Power points come first: tell your designer where the hubs and motors will sit, and if you want motorised curtains, plan power points in the ceiling. The neutral wire is the decision that shapes your choice of switch.  A neutral wire is the return path that lets a smart switch stay powered even when the light is off.

Standard BTO flats do not have one at the switch box. They only have a live wire, which simply opens or closes the circuit to the light.

So you have two routes, and your electrician needs to know which one you are taking:

  • Pull a neutral wire to the switch boxes during the renovation, and use either the  K series, R Series  or the Pro series, which need one. Koble’s advice for a major renovation is to pull the neutral wire.
  • Keep the live-only wiring and use the R series smart switches, Koble’s “no neutral” switches. They are designed to work safely without hacking walls to pull new cables, and they can be added after you move in.

Which route suits you depends on how much building work your renovation already involves. If the walls are being opened anyway, a neutral wire can be run at the same time. If not, the R series saves the work. For the full comparison, read neutral and no-neutral wires explained.

Singapore Safety Mark for smart lights

Lights have a safety requirement too. In Singapore, smart light drivers need to carry the Singapore Safety Mark, and Koble’s smart lights carry it. 

Working with your interior designer and contractor

Once these decisions are made, Koble works alongside your designer and contractor through the renovation:

  • Before the works: the electrical requirements from your consultation go to your designer, who plans the power points and wiring around them.
  • During the early electrical works: Koble inspects the wiring, attends site meetings and advises your designer’s electricians.
  • In every package: site coordination with your interior designer is included.

What a BTO smart home package costs

That coordination is part of every package, and packages are priced by flat size: SGD 1,800 to SGD 2,500 for a 3-room flat, and SGD 2,200 to SGD 3,500 for a 4-room or 5-room flat.

A package lets you control your lights, fans, water heaters and air conditioners, with automations such as scheduling your water heater or turning on the air conditioner before you arrive home. That control comes from Koble’s smart switches and air conditioner controller, which you can run from the app, with your voice or at the switch on the wall. 

Every package also covers the hardware, installation, software configuration and a 1-to-1 handover tutorial. You can see what each bundle includes in Koble’s HDB smart home bundles.

Common mistakes to avoid

Two mistakes come up often when BTO owners plan a smart home, and both are about timing:

  • Overlooking ceiling power points for curtains. Motorised curtains are hardwired, which is much harder to do after the renovation.
  • Relying on a single Wi-Fi router for the whole house. This causes connection dropouts for Wi-Fi devices such as infrared controllers and cameras.

The bigger mistake is renovating first and speaking to Koble afterwards. Once the renovation is done, hardwiring becomes much harder, which means extra work. Speaking to Koble 6 to 8 weeks before key collection gives you the budgetary quote and the electrical requirements before any of that is fixed.

WhatsApp Koble on 8129 4164 to book your consultation before key collection and get a budgetary quote.


BTO smart home FAQ

When should I contact Koble about my BTO flat?

6 to 8 weeks before key collection, ideally before you hire an interior designer.

How much does a smart home package cost for a BTO flat?

A typical package costs SGD 1,800 to SGD 2,500 for a 3-room flat, and SGD 2,200 to SGD 3,500 for a 4-room or 5-room flat.

What does a BTO smart home package include?

The hardware, installation, software configuration, site coordination with your interior designer and a 1-to-1 handover tutorial.

How long does the installation take?

The hardware installation takes 1 day, once your lighting and switch boxes are fully installed.

Do BTO flats have a neutral wire at the switch?

No. Standard BTO flats only have live wires. Koble’s R series switches work without a neutral wire, while the K series and the Pro series need one.

Can I add smart devices after I move in?

Wireless devices, such as the “no neutral” switches, can be added easily later. Hardwiring motorised curtains or cameras is much harder after the renovation.

Will one Wi-Fi router be enough for my smart home?

A single router for the whole house can cause connection dropouts for Wi-Fi devices such as infrared controllers and cameras.

What if my interior designer has never worked on a smart home?

Koble’s team guides the designer through the process, attends site meetings and advises the designer’s electricians.

Can I change my package after I sign up?

Yes, during the early electrical works. Koble inspects the wiring at that stage, and you can add or remove smart devices freely.

When do I pay the downpayment?

After the pre-key collection consultation and the budgetary quote.

What help do I get after I move in?

Koble configures the software and gives you a personalized 1-to-1 tutorial.

Locate Us

  • Koble Showroom

    161 Lavender Street #01-07, Singapore 338750

    (With Smart Home Specialist)

More Related Blog

Can Your Smart Home Still Function Without the Internet?

September 27, 2024

Building A Smart Penthouse For Owners who are Frequent Hostess

November 23, 2022

Koble’s Guide To Seamless Home Automation

February 16, 2024

Understanding Smart Home Costs in Singapore with Koble

January 12, 2024

Koble Smart Home

Hi there 👋 How can we help